Jacuzzi Hot Tubs

Cupholder Light assembly for Jacuzzi Hot Tubs Kit includes: Wall fitting Gasket Nut LED with 14' cable

Cupholder Light assembly for Jacuzzi Hot Tubs Kit includes: Wall fitting Gasket Nut LED with 14' cable

Footwell Light Assembly for Jacuzzi Hot Tubs 2007-2012 Kit includes: Wall fitting (Marked as B) Nut (Marked as D) LED with mini-DIN connector...

Footwell Light Assembly for Jacuzzi Hot Tubs 2013+ Kit includes: Wall fitting (Marked as B) Nut (Marked as D) LED with mini-DIN connector...

LED Pillow Light for J-300 series Jacuzzi Hot Tubs.

Jacuzzi factory equipment corona discharge ozonator. Order #6473-150 for all 230VAC model hot tubs. Order #6473-104 for all 110VAC/220VAC convertable...

Jacuzzi two position terminal block used in all 230V J-200 and J-300 spas built from 2002 to 2015. Not for use in J-310, J-315, J-325 (most years)...

Jacuzzi J-300 Series 2 Pump Circuit Board. Used in j-335, J-345, J-355, J-365, J-375 and J-385 made in 2016 to May 2018

Jacuzzi J-300 Series Single Pump System Circuit Board. Used in J-315 and J-325 made 2016 to May 2018

 The MCB311A is a replacement for Jacuzzi SCM and  older controls. A sequencing switch has several micro-switches that change orientation...

This jet was commonly the smallest jet in any Jacuzzi Hot Tub built prior to 2001, and  had some later-year applications in the lower-end...

This jet was commonly the smallest jet in any Jacuzzi Hot Tub built prior to 2001, and  had some later-year applications in the lower-end...

Transforms 120V AC input to 110V DC output. Found in most older Jacuzzi Blue Box SCM mechanical controls.

Jacuzzi Ozonator Installation Kit. Include injector, check valves, tubing and clamps. If your hot tub has never had an ozonator installed, this kit...

20 Amp Circuit Breaker found in most all older Jacuzzi Blue Box and Brown Box SCM Controls.  

New for 2016. Jacuzzi Direct replacement for Laing brand circulation pump.  No need for a retro fit kit. 3/4" barbed fittings with a small...

New for 2016. Jacuzzi Direct replacement for Laing brand circulation pump.  No need for a retro fit kit. 3/4" barbed fittings with a small...

New for 2016. Jacuzzi Direct replacement for Laing brand circulation pump.  No need for a retro fit kit. 3/4" barbed fittings with a small...

New for 2016. Jacuzzi Direct replacement for Laing brand circulation pump.  No need for a retro fit kit. 3/4" barbed fittings with a small...

This new-style circulation pump LX (Model WTC50M)  Intake: 1-1/2" Discharge 1-1/2" side discharge set at 3:00 position. Voltage: 230

This new-style LX circulation pump works for Jacuzzi® J-300 Series Hot Tubs Intake: 1-1/2" Discharge 1-1/2" side discharge...

The Jacuzzi E-10 Circulation Pump works for all  J-300, J-200 with circ pump, and some older  Platinum Series Whirlpool Bath builds. ...

The Jacuzzi E-10 Circulation Pump works for all  J-300, J-200 with circ pump, and some older  Platinum Series Whirlpool Bath builds. ...

Replacement parts for all Jacuzzi ClearRay sanitizer systems. Jacuzzi recommends the replacement of your ClearRay bulb on an annual basis.

A Jacuzzi double pole double throw contactor used in older SCM blue box control systems. 110V DC coil. Commonly used as the heater contactor.

Model #6600-641 topside control panel fits all Redondo and Hermosa hot tubs.

24" TEMP / HI LIMIT SENSOR W/ 1/4"" BULB FOR VALUE / LE / M7 SYSTEM Used in Echo / Buiders Series with R574 and/or R576 Circuit Boards...

Replacement pressure switch for all Echo, Builders and Z Series hot tubs. Screws into Heater manifold on all R574/R576 control systems Can be...

Balboa 2 pin 96" temp sensor with a 3/8 bulb. Used in many Echo/Builders series hot tubs with R574 and R576 Circuit Boards

Jacuzzi  Flow Switch used in J-300 Series Digital Models manufactured from 2002 to present. Which Switch Do I Need? J-300 Series LED models...